Xcessive Manufacturing

BEAMS Alternator Bracket kits

BEAMS Alternator Bracket kits

Availability: In stock

Product Name Price Qty
Beams Aternator Bracket - Series 1 - w/o ALT
Beams Aternator Bracket - Series 2 w/ ALT
  • Description


    If your BEAMS alternator goes bad or you just want the peace of mind of running a readily available  JZ alternator, then our braket is for you!

      General fitment

      The all new alternator bracket bolts onto the stock 3 mounting points on the side of the engine block, this ensures a solid base for the bracket to do it's job. The new alternator is from any JZ from '95 to '05 with a 2.8" (71mm) pulley ('98-'05 GS300 is a good choice). The pulley is slightly larger then the BEAMS which will reduce the peak RPM on the alternator and prolong it's life, it's also needed for proper belt fitment. While the JZ pulley is a 6 rib, the BEAMS 4 rib belt drive will align properly, no need to change pulleys.

      Electrical connections 

      The JZ alternator uses the same plug type as the BEAMS for the excite wires and the same size post for the power wire. The location of the two connections are quite close to the BEAMS locations making hook ups easy. The dificulty with other alternator kits is the placement of the power wire right up against the engine block leaving nearly no room for error to cause a dead short. The excite circuit is another benefit with the JZ alternator as the circuit is identical to the function of the BEAMS so there's no question if the alternator will work or not as with later model alternators used in other kits that have multiple excite designs.

      Alternator power output 

      The stock BEAMS alternator is a 90 amp unit, the JZ alternator used in our kit is a 100 amp. Other kits on the market actually down grade you to an 80 amp unit, you sure you want to do that?

     Weight savings and construction 

      While our bracket is made from formed and welded steel over aluminum, we managed to keep the weight down from a stock of 5.2 lbs. to ours at only 1.4 lbs. Our formed steel design allows us to use the 3 point mounting that Toyota uses for a solid base on the engine allowing us to then build in high torsional strength due to the contoured and welded steel construction. 

     There are two kits, the Series 1 kit does not have the alternator while the Series 2 kit comes with the 100A alternator.

    Engine not included!


    Series 1 Kit includes:

    New Bracket

    Bolting hardware

    New drive belt

    Series 2 Kit includes:

    New Bracket

    Bolting hardware

    New drive belt

    100A Alternator


    Write Your Own Review

    Only registered users can write reviews. Please, log in or register



    Use spaces to separate tags. Use single quotes (') for phrases.