Xcessive Manufacturing

Link Swap Harness Switch Panel -Bent Flange - S1

Swap Harness Switch Panel - Bent Flange - Series 1 (for use with Panic Wire harness)

Availability: In stock




  If  you 're going with one of our harness and ECU kits with a Panic Wire harness, this switch panel will make a universal installation extremely easy.

 Keeping it pretty simple we went with a push button start and 4 toggle switches. The first three toggles are used for ECU based functions while the fourth switch is a spare that can be utilized for future expansion. We've also included a dual USB port to run a tablet for a dash or other USB device. 

 The switch panel comes wired to the 16 pin connector that mates dirrectly to the Panic Wire engine harness for the easiest hook up possible. Just find a spot to mount the switch panel and plug it in to the harness. The only wiring required will be the fuel pump trigger.

  The switch panel is 1/8" thick 5052 Aluminum that's 7 31/6" wide by 2 1/8" tall with a 1" bent flange and three moutning holes. The overall size is designed to fit in a standard DIN radio opening, you'll just have to figure out how to attach it when it's in there.

  This listing is for the switch panel when purchased at the the time of a complete harness kit. For a stand alone panel with Panic Wire plug, see L-PW-AH-S2.



Write Your Own Review

Only registered users can write reviews. Please, log in or register



Use spaces to separate tags. Use single quotes (') for phrases.