RA24/29 Radiator fan shroud kit

  I f you've swapped your radiator to a nice Aluminum Koyo unit or just want to go with a nice big cooling fan, you'll want our fan and shroud kit.

   The aluminum shroud is made from .125" thick 6061 T6 sheet with mounting holes to bolt directly onto the Koyo radiator. We've also included a 16" slim line fan that will bolt directly to the shroud, no extra tabs or mounts required.

   All required bolting hardware is included for the fan to shroud, the only part we recommend is getting is some foam tape to seal off any gaps between the shroud and radiator for maximum cooling.

The base fan in the kit is a 16" fan that draws 10 amps and sits at 3.25" thick when measured from the shroud face .

If you'd like to upgrade, we offer the Spal 16" straight blade low profile fan that draws 15 amps and sits 2.125" thick. While the straight blade fans are a bit louder, they tend to pull a bit harder.

Radiator not included