TE72 chassis to Manual Transmission Cross Member (W58, R154)

    If your doung a 1UZ swap in your TE72 with our motor mount brackets, you might like this transmision cross member. It's designed to work with both the R154 and W58 transmissions and fit the chassis without any modifications.

    We've also supplied all the required bolts for the cross member to chassis mounting and made the bracket to acommodate both stock transmisison rubber mounts and our Urethane trans mount.

   Toyota has two versions of rubber trans mounts, an early style and a later style. Early mounts are typical to the MK3 Supra and older. They have different bolt patterns on the top and the bottom.The early style mount with a bolt spacing of 2.2" or 56mm side to side on the bottom is the one that fits this crossmember. The later style larger mount pattern will not fit. Our Series 1 urethane mount is the correct size (T-UTM-S1). If you have a later model transmssion we also have a hybrid mounts (T-UTM-S4) that converts to fit this TCM.

   This cross member does NOT work with the BEAMS 6 speed  (J160) or Automatic transmissions, it's specifically designed for our 1UZ swap.