Corolla/Celica Axle Brackets - 2.5/2.6"

If you're looking to do an axle swap in your E chassis or put an E type multilink axle under a different car, you'll want these axle brackets to do the job. If you're thinking about cutting off a set of stock brackets and re-using them, you can be in for a fair bit of work. When you get them cut off, the brackets are old, rusty, cut up and no longer match the shape of the axle tubes and often times have suspension mounting holes that are no longer round and you will still need to buy geometry correction brackets for lowered cars or more traction.

Our all new brackets are CNC cut from 1/8" (3mm) steel then formed to work with stock type suspension components. We've also made them with multiple geometry correction points already built in so you won't need to buy any bolt on correction brackets as well. We've also maintained the stock mounting points to keep the hardware legal for sanctioning bodies that require stock mounting geometry.

We leave the brackets with all the material on all sides intact. We believe these are not parts that should be "lightened out" or have logos cut into them reducing strength.

It should be noted that these brackets are designed for AE/TE chassis and the geometry is correct accordingly. IF YOU'RE SWAPPING TO A DIFFERENT CHASSIS, LIKE A CELICA, YOU MAY NEED TO ADJUST FITMENT. Not all Celica's use the same body mount points or arms, so not all swap situations are the same.

We offer the lower shock mounts in two versions, relocated inward for more tire clearance that with some True Type coils may not fit such as Fortune Auto (inverted spring). Other brands such as BC Racing and Stance work without issue (top spring). We also offer the Offset shock position that is the same as OEM placement if you have concerns with True Type coil overs or other fitment.