Skip to product information
MX83 Motor Mount Brackets to 1UZFE

MX83 Motor Mount Brackets to 1UZFE

$127.00 USD

Pickup available at Xcessive Manfuacturing

Usually ready in 2-4 days

View store information

MX83 Motor Mount Brackets to 1UZFE

'89-'90 Zenki

Xcessive Manfuacturing

Pickup available, usually ready in 2-4 days

7700 Southwest 69th Avenue
Portland OR 97223
United States

+15035042147
Product Details

Our all new steel corrected geometry mount brackets for 1UZ blocks are designed with specific angles for the '89-'90 or '91-'92 Cressida front cross members.

Fitment

  If you're doing a 1UZ or 3UZ, these brackets are the ones to use. We've made them with the correct angles to properly fit the specefic cross members of the Zenki/Kouki chassis.

Stock rubber mounts will require the index pin to be ground off to allow these brackets to properly sit flat due to the application of the slotted mount.

Material and construction

CNC cut from 1/4" steel plate, formed and plated, these engine brackets will handle all the punishment you can throw at them and last a life time doing it. We use a single piece of steel plate that's formed into shape to eliminate welds in transition areas from one plane to another, then we add a gusset for a bit strength. Our design allows for great acess to the bolts without a compromise in strength or the potential for cracked welds over time. Our goal isn't one or two years of service, but a lifetime.

Zenki '89-'90 vs. Kouki '91-'92

These mounts are specifically designed for the two generations of chassis '89-'90 Zenki and '91-'92 Kouki . Thebrackets do NOT interchange. Improper installation will cause premature failure of the motor mounts if used for the wrong application. You may need to check the production year on the early Zenki chassis. Some cars produced from 8 of 1990 will have the Kouki cross member. You can contact us if you have this concern on how to identify it.

Related items