MX83 Motor Mount Brackets to LS

Our all new steel corrected geometry mount brackets for LS engines are designed with specific angles for the '89-'90 Zenki or '91-'92 Kouki Cressida front cross member.

Fitment

  If you're doing an LS swap, these brackets are the ones to use. We've made our brackets about 1" of adjustment. Oil pans ,transmission shifters and cross members will typically help dictate the location of the engine.

Stock rubber mounts will require the index pin to be ground off to allow these brackets to properly sit flat due to the application of the slotted mount.

Material and construction

CNC cut from 1/4" steel plate, formed and plated, these engine brackets will handle all the punishment you can throw at them and last a life time doing it. We use a single piece of steel plate that's formed into shape to eliminate welds in transition areas from one plane to another, then we add a gusset for a bit strength. Our design allows for great acess to the bolts without a compromise in strength or the potential for cracked welds over time. Our goal isn't one or two years of service, but a lifetime.

Zenki '89-'90 vs. Kouki '91-'92

These mounts are specifically designed for the two generations of chassis '89-'90 Zenki and '91-'92 Kouki . The brackets do NOT interchange. Improper installation will cause premature failure of the motor mounts if used for the wrong application. You may need to check the production year on the early Zenki chassis. Some cars produced from 8 of 1990 will have the '91-'92 style Kouki cross member. You can contact us if you have this concern on how to identify it.

These mounts do not fit the GX81 Cross Member

Kit includes

1 pair of formed brackets

Block bolting hardware

Shown with X8 Urethane motor mounts and base plates, not included with motor brackets.